Operation
50
Vidikron Vision Model 15 Installation/Operation Manual
Factory Reset:
To restore all Setup Menu options to their factory-default values, select
Factory Reset and press
ENTER
.
Use the arrow buttons to highlight “OK,” then press
ENTER
again to confirm the operation.
ISF
To access the ISF calibration menu, select ISF from the Main Menu and press
ENTER
.
Picture Memory:
Refer to
Picture Memory
on page 37.
Brightness:
Refer to
Brightness
on page 38.
Contrast:
Refer to
Contrast
on page 38.
Color:
Refer to
Color
on page 39.
Tint:
Refer to
Tint
on page 40.
Sharpness:
Refer to
Sharpness
on page 40.
Gamma:
Refer to
Gamma
on page 40.
Color Temp.:
Refer to
Color Temp.
on page 40.
BrilliantColor™:
Refer to
BrilliantColor™
on page 41.
Black Level:
Refer to
Black Level
on page 41.
White Balance:
To remove any trace of color from the white areas of the projected image,
select White Balance from the ISF menu and press
ENTER
.
• Gain:
Use the Gain controls to correct color imbalances in the bright areas of the image. A
good way to do this is to use a test pattern consisting mostly of solid white areas, such as
an 80 IRE “window” pattern. If the white areas contain traces of red, green or blue,
decrease the Gain for that color.
• Offset:
Use the Offset controls in the White Balance sub-menu to correct color imbalances
in the dark areas of the image. A good way to do this is to use a test pattern consisting
mostly of dark gray areas, such as a 30 IRE “window” pattern. If the gray areas contain
traces of red, green or blue, decrease the Offset for that color.
The Gain controls increase or decrease the full-scale input range; the Offset controls shift
the entire range, resulting in a change in brightness.
DNR:
Refer to
Digital Noise Reduction (DNR)
on page 49.
ISF
Picture Memory
Custom
Brightness
0
Contrast
0
Color
0
Tint
0
Sharpness
3
Gamma
2.2
Color Temp.
6500
BrilliantColor™
Off
Black Level
0 IRE
White Balance
DNR
0
Save Settings
Blue Image
Off
Splash Screen Timer
5
Reset to Defaults
➤
This menu should be used by ISF-certified technicians only. You must enter a
passcode to access this menu.
Generally, higher Gain settings reduce the image contrast; higher Offset
settings reduce the image brightness.
Note
Note
Summary of Contents for Vision 15
