Installation
Vidikron Vision Model 15 Installation/Operation Manual
33
3.11
Installing and Adjusting
the CineWide Anamorphic
Lens
If you are installing a Vision 15ET/CineWide, proceed as follows to install and adjust the
anamorphic lens.
The CineWide anamorphic lens mount kit consists of everything shown in Figure 3-17. Some
components shipped with your projector may differ slightly from what is shown in these
instructions.
Figure 3-17. Anamorphic Lens Mounting Assembly - Exploded View
1.
Use the Height/Pitch Adjustment Screws (
2
) and Washers (
3
) to attach the Lens
Mounting Bracket (
5
) to the Anamorphic Lens (
1
).
2.
Remove the nut and rubber collar from each Swell Latch Assembly (
4
).
It is extremely important that the primary lens is properly adjusted
before you install the anamorphic lens. Ensure that the image from
the primary lens is perfectly centered on the screen.
Note
3
Height/Pitch
Adjustment
Screw,
4-40 x 1/4"
(4x)
4
Swell
Latch
Assembly
(2x)
1
Anamorphic Lens
2
Washer (4x)
6
Anamorphic Lens
Base Plate
5
Anamorphic Lens
Mounting Bracket
Summary of Contents for Vision 15
