Vidikron Vision 15, Installation & Operation Manual

Page: 37 / 82

Installation
Vidikron Vision Model 15 Installation/Operation Manual 23
3.6
Connections to the Vision
15 Proceed as follows to connect the Vision 15 to your video sources, external controller(s) – if
present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on connectors
that have them.
Connector Panel Access To access the connector panel, pull firmly on the cable access cover to open it.
Connecting Source
Components to the Vision 15 Connect your video sources to the Vision 15 as shown and described in the sections that
follow.
HDMI/DVI Connections: See Figure 3-9.
Use the HDMI input whenever possible. This ensures the highest video
quality because the signal is carried in the digital domain throughout the
entire signal path, from source component output into the projector.
Tip