Installation
30
Vidikron Vision Model 15 Installation/Operation Manual
3.8
Changing the OSD
Language
The Vision 15 OSD language is initially set to English, but can also display the menus in
French, Spanish, Italian or German. To change the OSD language:
1.
Press
MENU
.
2.
Select
Installation
from the Main Menu and press
ENTER
.
3.
Select
Language
from the Installation Menu and press
ENTER
.
4.
Press
or
to highlight the desired language and press
ENTER
.
3.9
Adjusting the Picture
Orientation
By default, the Vision 15 is configured for a “floor/front” installation, in which the projector is
installed upright and in front of the screen. If it is installed behind the screen and/or mounted
on a ceiling, you must change the picture orientation. To do this:
1.
Press
MENU
on the remote control.
2.
Select Installation from the Main Menu and press
ENTER
.
3.
Select Orientation from the Installation Menu and press
ENTER
.
4.
Choose Floor Rear, Ceiling Front or Ceiling Rear to match the installation method.
Summary of Contents for Vision 15
