Vidicode SD2750, Manual

Page: 64 / 69

Call Recorder Single Digital manual ©Vidicode 2011-2014 64
First enter the original card code.
•
Press CONTINUE.
Enter the new card code.
•
Press CONTINUE.
Repeat the new card code for confirmation.
•
Press CONTINUE.
The new card code is accepted.
•
Press STOP
STOP STOP
STOP to exit the Change Card Code menu
A CryptoCard allows for two invalid PIN code entries. After the third
invalid Pin code entry the CryptoCard is disabled. The next time the
recorder will ask for the PUC code to enable the card again. The
CryptoCard allows for four invalid PUC code entries. After the fifth
invalid PUC code entry the recorder will disable the card definitively. It is
advised to keep the PUC code in a safe place.
12.4 Making an encrypted recording
To make an encrypted recording it is essential that the Use CryptoCard
function is enabled in the Recorder settings menu. Enable the Use
CryptoCard function as described in § 4.14. With Use CryptoCard
enabled it is no longer possible to make normal, unencrypted recordings
without disabling the Use CryptoCard function again.
Insert the CryptoCard in the card reader of the recorder:
When a valid CryptoCard has been inserted all recordings made
thereafter will be encrypted as long as the card remains inserted.
Removing the card disables recording automatically.
Encrypted recordings are stored as such and can be played only with a
matching CryptoCard inserted. Encrypted recordings can also be
Tuesday 21-07-09 17:11
Card insterted
New Code accepted.
STOP