Vidicode SD2750, Manual

Page: 20 / 69

Call Recorder Single Digital manual ©Vidicode 2011-2014 20
3 Configuration and operation
After you have connected the hardware it is time to configure and use
the Call Recorder Single Digital. This chapter explains you how the user
interface works. In the following chapters we guide you with the
configuration. You must:
•
Go through the recorder settings and make changes if required
•
Go through the LAN settings so the recorder will fit in with your
network
•
(Optional) Install the Call Recorder Access System software on
your PC and test the network connection to the recorder
3.1 Operation basics
The Call Recorder Single Digital has a common menu driven user
interface. Most functions and operations are initiated by pressing a
function key followed by a sequence of menu keys of which the function
is determined by the text in the display. The use of function keys and
menu keys is as follows:
Function keys
Function keys Function keys
Function keys
The most frequently used functions of the Single Digital have been
grouped in the function keys. Throughout the entire manual symbols
representing the function keys are used to indicate the function key
corresponding to the described function.
Menu keys Menu keys Menu keys Menu keys
After pressing a function key the available functions are assigned to the
four menu keys. The operation of the menu keys is determined by the
text in the display right above the corresponding key. Throughout the
entire manual figures representing the display with or without the
menu keys are used to show the required action corresponding to the
described feature.
Example:
In this example we will open the recorder settings menu. Press the
“Settings function key”, to open the Recorder setting menu.
The display will change, and text will appear on the display above four
Soft keys.