Vidicode Call Recorder ISDN, Manual

Page: 39 / 116

Call Recorder PRI ISDN manual ©-Vidicode 2008 39
When “Start
Start Start
Start” is selected a recording must be started manually. It will
not be started automatically unless it is on the whitelist. When the
recorder was not yet recording because it was on the whitelist, the
beginning of the call is not recorded. When the Notification message is
enabled, a Notification will be sent to the caller.
When “Stop
Stop Stop Stop” is selected a recording can be stopped. When the call was
being recorded, it will have been recorded from the start until it
stopped recording.
When “Start/Stop
Start/Stop Start/Stop Start/Stop” is selected a recording can be started and stopped
must be started manually. It will not be started automatically unless it is
on the whitelist. When the recorder was not yet recording because it
was on the whitelist, the beginning of the call is not recorded. When a
Notification message is enabled, a Notification will be sent to the caller.
Note: Note: Note: Note: It is not recommended to combine this option with existence of a
whitelist or a blacklist because the user may not know if the call is
already recording and therefore may stop the recording by mistake if he
wants to start recording.
When “Stop/Start
Stop/Start Stop/Start
Stop/Start” is selected a recording can be stopped and started.
All calls are recorded automatically from the start. When a Notification
message is enabled, a Notification will be sent to the caller. Note:
Note: Note: Note: It is
not recommended to combine this option with existence of a whitelist
or a blacklist because the user may not know if the call is already
recording and therefore may stop the recording by mistake if he wants
to start recording.
When “Save
Save Save
Save” is selected in the option the current call is permanently
saved and excluded from the AutoDelete function.
When “Email
Email Email
Email” is selected the recording is Emailed according to the
email-list.
•
Press NEXT NEXT NEXT NEXT to continue in the menu with the [[[[ ]]]] Action Action Action Action setting
or press STOP
STOP STOP
STOP to exit the configuration
configuration configuration
configuration menu.
4.10 [ ] Dialing
When not recording, the user can select an external line, hear a dial
tone, and then send a command to the Call Recorder. The command will
either be
or + two an optional telephone number.