Vidicode Call Recorder ISDN, Manual

Page: 61 / 116

Call Recorder PRI ISDN manual ©-Vidicode 2008 61
In the example above the line number 06 has been entered. The top line
will display the selected channel number followed by the last three
numbers of the local phone between square brackets [ ]
[ ] [ ] [ ] . To the right is
the remote number between brackets ( ) ( ) ( ) ( ). In between the local and
remote numbers is an arrow representing an incoming or outgoing call,
to the left is always the local number, to the right the remote number.
An arrow pointing to the left is an incoming call, an arrow pointing to
the right is an outgoing call. The second line in the display indicates if
the line is used. In case a call is going on the display will show:
In this case the channel 6 is used for an incoming call from the phone
number 079 3479336 to the incoming number that ends with the
number 023. The channel is recording and the call has been going on for
4 minutes and 36 seconds. You can also see there is one line busy at that
moment. The numbers of the calls remain in the display of the channel
after the call has ended, it will however indicate the line is “free”.
Use the and keys to scroll through the channels. It is possible
to scroll through the busy lines with the key.
5.6 Monitoring
Monitoring of the telephone lines is a feature of the Call Recorder that
allows the user to listen in on the recording of the telephone
conversations.
5.6.1 Monitoring on the desktop model
This is a procedure to start monitoring that works on the desktop model
only:
•
Press the function key to open the monitor function.
There is no special function key for monitoring on the 19” model.
The display will show:
Ch. 06 [023]
–
(793479336)
Recording 00:04:36
Lines Busy = 1