Vidicode Call Recorder ISDN, Manual

Page: 41 / 116

Call Recorder PRI ISDN manual ©-Vidicode 2008 41
44 44 44 44 (telephone number) (telephone number) (telephone number) (telephone number)
Start recording and save/mark current outgoing call
41
41 41
41 (telephone number)
(telephone number) (telephone number)
(telephone number)
Start and save/mark and Email current outgoing call.
00 00 00 00 (tel (tel (tel (telephone number) ephone number) ephone number) ephone number)
Do not record current outgoing call.
99
99 99
99
Erase last recording (must be enabled in the hidden menu
first).
7 7 7 7((((x xx x)))) x= 1 to 9 x= 1 to 9 x= 1 to 9 x= 1 to 9
Reserved for user commands.
The command is stored by the recorder and PC applications
can use it.
8 8 8 8((((x xx x)))) x= 1 to 9 x= 1 to 9 x= 1 to 9 x= 1 to 9
Reserved for answering machine functions.
The option “User Code
User Code User Code
User Code” is a method for call centre employees with a
variable workstation to identify themselves. It is outside the scope of this
manual to explain the User Code feature in detail.
Note:
Note: Note:
Note: It is possible that your telephone system does not allow
commands while there is no connection yet. We have not yet observed
this on a PBX, but we did see it on a certain model of ISDN telephone.
•
Press NEXT
NEXT NEXT
NEXT to continue in the menu with the next menu item
next menu item next menu item
next menu item or
press STOP
STOP STOP
STOP to exit the configuration
configuration configuration
configuration menu.
4.11 Compression
The default procedure while recording is to compress the recorded
audio from aLaw to G.723.1. This is a factor 10 compression with hardly
any loss of quality. It can however be disabled. The available recording
time on the hard disk is calculated based on G.723.1 compression.