Manual Call Recorder Octo | Quarto © Vidicode 2011-2022
58
9.3
Making an encrypted recording
To make an encrypted recording it is essential that the
“
Use CryptoCard
”
function is enabled in the Settings menu. Enable the
“
Use CryptoCard
”
function as described in § 4.7. With
“
Use CryptoCard
”
enabled it is no
longer possible to make normal, unencrypted recordings without
disabling the
“
Use CryptoCard
”
function again.
Insert the CryptoCard in the card reader of the Call Recorder. The display
will show:
When a valid CryptoCard has been inserted all recordings made
thereafter will be encrypted as long as the card remains inserted.
Removing the card disables recording automatically.
Encrypted recordings are stored as such and can be played only with a
matching CryptoCard inserted. Encrypted recordings can also be
downloaded to a PC with the Call Recorder Access System software,
however, they cannot be played on the PC without a CryptoCard
matching the card used when the recording was made. See the
following section for a detailed explanation.
9.4
Playing an encrypted recording
Encrypted recordings can only be played back with the original or a
matching CryptoCard. Playback of an encrypted recording on the Call
Recorder works quite simple. Search and select the desired recording as
described in Chapter 5. If playback of the encrypted recording is started
the Call Recorder will automatically ask for the Card code.
The display will show:
After entering your PIN the soft-key function CONTINUE is added in the
display.