Manual Call Recorder Octo | Quarto © Vidicode 2011-2022
57
The PIN can be changed. This can be done only when the
“
Use
CryptoCard
”
function has been enabled. See § 4.7 to enable the use of a
CryptoCard.
•
Press the
and
SYSTEM function key.
•
Press NEXT twelve times.
The display will show:
•
Press CHANGE to change the card code.
First enter the original card code.
•
Press CONTINUE.
Enter the new card code.
•
Press CONTINUE.
Repeat the new card code for confirmation.
•
Press CONTINUE.
The display will show:
A CryptoCard allows for two invalid PIN entries. After the third invalid
PIN entry the CryptoCard is disabled. The next time the Call Recorder will
ask for the PUC to enable the card again. The CryptoCard allows for
four invalid PUC entries. After the fifth invalid PUC entry the Call
Recorder will disable the card indefinitely. It is advised to keep the PUC
in a safe place.