Videx 2 Wire, Manual

Page: 21 / 44

Two Wire Videokit ESVK Series
PrtCode:ESVK_ENG_1.6.doc – Pag.21/44 25/11/2009 Rev.1.6
Art.318
Two way passive distribution box
BUS
IN
BUS
OUT
BUS
OUT1
BUS
OUT2
Art.318
Close
Open
BL
Fig.1 Fig.2
DESCRIPTION
The unit distributes the bus signal to 2 outputs linked to videophones or intercoms. It is a passive distributor, so there is no possibility to adjust the video
amplification. The device is suitable for small systems with a maximum distance between door panel and the last monitor of 70 metres.
CONNECTION TERMINALS AND JUMPERS
Terminal/Jumper Description
BUS IN
Bus input terminals
BUS OUT Bus output terminals (to next distrbutor)
BUS OUT 1 Videophone/Intercom bus output 1
BUS OUT 2 Videophone/Intercom bus output 2
BL Close/Open bus output jumper. If the distributor is the last move to close otherwise leave open.
SPECIFICATION
Housing/Mounting Plastic box 50x60x20mm / direct wall mounting
Push Buttons N/A
Programming N/A
Controls N/A
Power Supply Supplied by the BUS line
Working Temperature -10 +50ºC
CUSTOMER SUPPORT INFORMATION
All Countries Customers UK Customers
VIDEX Electronics S.p.A.
www.videx.it – technical@videx.it
Tel.+39 0734 631669
Fax +39 0734 632475
VIDEX Security LTD
www.videx-security.com
Tech Line 0191 224 3174
Fax 0191 224 1559
The product is CE marked demonstrating its conformity and is for distribution within all
member states of the EU with no restrictions.
This product follows the provisions of the European Directives
89/336/EEC & 92/31/EEC (EMC),
73/23/EEC (LVD) and 93/68/EEC (CE marking).
Il prodotto è marchiato CE a dimostrazione della sua conformità e può essere distribui-
to liberamente all’interno dei paesi membri dell’unione europea EU.
Questo prodotto è conforme alle direttive Europee
89/336/EEC & 92/31/EEC (EMC),
73/23/EEC (LVD) e 93/68/EEC (Marcatura CE).