Configuration
38
HQ−IDC−23012P
Order No. M578527AC/112003
© 2003 videotronic gmbh
ALL RIGHTS RESERVED
3.2.16
MOTION (Motion Detection)
In this menu you enable the motion detection. To do this, you have to specify
an alarm zone in which a movement will trigger a message. You will receive the
message on the monitor.
Move the arrow
with the
<Down>
key
to the
<MOTION>
menu.
Press the
<ENTER>
key to open the input
mode.
Press
<UP>
or
<DOWN>
to change the
selection from
OFF
to
ON
.
Press the
<ENTER>
key to open the input
mode.
Press the
<UP>
or
<DOWN>
keys to open
the corresponding submenu.
AREA
In this submenu you can specify the area
in which a movement will lead to an alarm.
Press the
<ENTER>
key to open the input
mode.
Move the flashing zone indicator (
A
) to
the zone you wish to select, e.g. (
B
),
using the
<UP>
or
<DOWN>
keys and
press the
<ENTER>
key.
This zone will be selected and then
appears in grey.
Move the flashing zone indicator (
C
) to
the next zone you wish to select using the
<UP>
or
<DOWN>
keys and press the
<ENTER>
key.
Select all zones using the method
described above.
Press the
<ESC>
key to quit the
submenu.
Fig. 43
MOTION
SETUP MENU [3/4]
POSITION
SAVE
H−GAIN
+6
V−GAIN
+6
MOTION
ON.
IR
ON.
INITIAL
ON
Fig. 44
MOTION
MOTION
AREA
LEVEL
+4
TIME
10sec
OSD
ON
Fig. 45
MOTION
Summary of Contents for HQ-IDC-23012P
Page 6: ...Contents 6 HQ IDC 23012P Order No M578527AC 112003 2003 videotronic gmbh ALL RIGHTS RESERVED...
Page 106: ...Annex 106 HQ IDC 23012P Order No M578527AC 112003 2003 videotronic gmbh ALL RIGHTS RESERVED...
Page 107: ...Annex 107 HQ IDC 23012P Order No M578527AC 112003 2003 videotronic gmbh ALL RIGHTS RESERVED...
