Connecting the Device
17
HQ−IDC−23012P
Order No. M578527AC/112003
© 2003 videotronic gmbh
ALL RIGHTS RESERVED
2.2
Connection to the Monitor
Connect the output socket
<VIDEO−Out>
(
D
) to the input socket
<VIDEO−In>
on your monitor.
Caution: Risk of damage! Only
connect the camera to the monitor when both
components are
disconnected
from the mains supply!
Note:
Follow the original operating instructions for the monitor!
Note:
To transmit the video signal, a coaxial cable (75
Ω
) is normally installed
between the camera and the monitor.
The maximum transmission distance without equalizer is approximately 300 m
for coaxial cables (RG 59).
If the transmission distance is greater than 300 m, the video signal has to be
processed with a video equalizer (e.g. KEV).
It is also possible to transmit video signals (with additional devices) over
substantial distances by means of twisted−pair cables
Fig. 6
Connection to the monitor
CCD camera
Monitor
Summary of Contents for HQ-IDC-23012P
Page 6: ...Contents 6 HQ IDC 23012P Order No M578527AC 112003 2003 videotronic gmbh ALL RIGHTS RESERVED...
Page 106: ...Annex 106 HQ IDC 23012P Order No M578527AC 112003 2003 videotronic gmbh ALL RIGHTS RESERVED...
Page 107: ...Annex 107 HQ IDC 23012P Order No M578527AC 112003 2003 videotronic gmbh ALL RIGHTS RESERVED...
