Instruc
tions manual - English - EN
47
MNVCUPTMAXB_1511_EN
10.1.8.2 Manual Control Menu (Limits)
It allows you to configure the following parameters:
1.
Pan Limits
: Enables the limits of Pan.
2.
Pan Start
: Sets the start limit of Pan.
3.
Pan End
: Sets the end limit of Pan.
4.
Tilt Start
: Sets the start limit of Tilt.
5.
Tilt End
: Sets the end limit of Tilt.
LIMITS
------------------------
1>PAN LIMITS : N
2 PAN START : + 0.00
3 PAN END : + 0.00
4 TILT START : + 0.00
5 TILT END : + 0.00
Fig.
101
This is a dynamic self-configuration menu based on
the choice made and shows the parameters on which
it is possible to operate.
10.1.8.3 Preset Menu
1.
Edit Preset:
To access the Modifica Preset
(Preset Modification) menu.
2.
Utility Preset:
To access the Utilità Preset (Preset
Utility) menu
PRESET
------------------------
1>EDIT PRESET >
2 PRESET UTILITIES >
Fig.
102
10.1.8.4 Preset Menu (Edit Preset)
It allows you to configure the following parameters:
1.
Number:
The Preset number to be edited.
2.
Enabling:
Enabling preset.
3.
Pan:
Pan position in degrees.
4.
Tilt:
Tilt position in degrees.
5.
Speed:
Position approaching speed when
preset is restored by the Patrol and Autopan
functions.
6.
Pause:
The dwell time in seconds before starting
the next movement in Patrol.
7.
Text:
The text that is displayed when the preset
position is reached.
8.
Go To Preset?:
Obliges the Pan & Tilt to move to
the selected Preset position.
9.
Enable Movements
: It allows you to choose a
new frame.
EDIT PRESET
------------------------
1>NR. : 1
2 ENAB.: N
3 PAN : + 0.00
4 TILT : - 40.00
5 SPEED: 20.00
6 PAUSE: 5
7 TEXT : PRESET 001
8 GO TO PRESET?
9 ENABLE MOVEMENTS >
Fig.
103
From the menu it is possible to directly store the
preset by sending the Iris Close command that
enables the pan & tilt movements.
