Videotec COMB, Instruction Manual

Page: 19 / 118

Instruc
tion manual - English - EN
17 MNVCCOMB_2046_EN
Arrange the fibre optics as indicated in the figure, use
the nylon ties supplied to fasten them (Fig. 18, page
17).
Fig. 18
Position the splice tray in place and fasten it using the
previously removed screws (Fig. 19, page 17).
Apply threadlocker in the fastening screws
(Loctite 243®).
Pay attention t o the fixing . Screws
tightening torque: 1.6Nm.
Fig. 19
7 Switching on
The unit is switched on by connecting the power
supply.
To switch off the unit disconnect the power.