Vidalux Essence Range, Installation And Operating Manual

Page: 6 / 38

IMPORTANT NOTICE
Before you proceed with fi tting your
Vidalux
Shower please read and understand the following:
By commencing testing and installation of the unit you are agreeing to the Terms and Conditions
set out by us
:
copies
of which
are available by contacting us by
by email or by
telephone (details
on the cover of this manual).
You are required to ensure the purchased product dimensions allows for ease of passage to the
intended installation area.
Regarding weight tolerances of installation area, it is advisable to contact a builder or refer to
Building regulations to ensure the product placement area has suffi
cient joist/fl oor support.
1. It is important that you ensure that your purchase has been delivered undamaged. You are required to
check the contents and report any damage that you feel needs repairing or replacing within 48hrs of
receipt of goods. Items reported damaged after this time WILL be chargeable.
2. The product you have purchased is designed for home DIY fi tting. You are
POMZ
required under the
Terms
and Conditions
to get
BOZFMFDUSJDTGFFEJOHUIFTIPXFSJOTUBMMFE
by a qualifi ed specialist. The
product requires connection to electricity
and this by law
require
s
a Part P qualifi ed electrician.
Failure
to provide evidence of this will void the relating product warranty
3. We are a supply only company. If you report to us any damage we will send replacements or solutions to
remedy the problem described. We endeavor to fully understand the problem fi rst by asking a series of
questions and then propose the solution. We may even ask for digital images to be sent via email to assist
the process.
The warranty is parts only and does NOT include fitting/inconvenience or other related costs.
4. You are required to ensure that you correctly water test
any bath
tub before fi tting and ensure that you
ZPVS
fi tter fully tests the unit upon completion and attends to any leaks and faults before he leaves.
5.
All hoses, such as to the valve assembly, shower outputs and air switches and waste are fi tted for
transport purposes and need to be properly sealed and tightened before use. During transportation
some connections can become dislodged and therefore break any watertight seal, you are required to
ensure that your fi tter specifi cally tests for these possible occurrences and seal/fi x a ccordingly.
6.
Do not book fi tt
JOH
until you have inspected the unit. We cannot be held responsible for delays
and costs incurred by having to return to fi t parts that need supplying.
7. We cannot be held liable for inconvenience caused due to lack of bathing facilities caused by any delay in
receiving your product or whilst awaiting parts.
8. Regarding our sales and technical support: We know our products and their requirements, but we are not
qualifi ed plumbers
or electricians
and accept no liability for claims suggesting the same. You are advised
to check the suitability of the product with a professional body.
It is the customer responsibility to ensure
the product is fit for purpose.
9
.
A 'Completion Certificate' is included at the end of the manual where you should record the details of
your installers - you will need this to record your warranty on our website.
4
ATTENTION
ALWAYS FIT EASY TO GET TO ISOLATION TAPS ON BOTH THE HOT AND COLD WATER
SUPPLY (NOT SUPPLIED). JUST LIKE A DISHWASHER OR WASHING MACHINE, THIS PRODUCT
MUST BE ISOLATED WHEN NOT IN USE.
REMEMBER:
These showers are designed to be free standing and movable from their location should you have the need to
replace anything. ALWAYS USE Flexible braided water inlet pipes (not supplied) at least a metre long (not
central heating plastic type!)
Always use a flexible waste pipe from your house supply to the shower .
NEVER FIX with rigid pipes, NEVER FIX the unit to the wall.