Vidalux Essence Range, Installation And Operating Manual

Page: 17 / 38

15
FITTING THE SHOWER DOOR WHEEL RUNNERS
Locate the pack of 8 twin wheel shower door runners (cams).
There are two diff erent types provided.
Continued...
STEAM TEMPERATURE SENSOR
This steam shower model is fi tted with a
temperature sensor that monitors the internal
cabin temperature. The temperature is selected
on the control panel. When the internal cabin
temperature reaches the predefi ned t emperature
it stops steam production until the temperature
falls below, where
upon it re-activates the steam
production again.
The steam sensor should be fi tted from the rear of
the shower. Just below the control panel you will
see a small silver gromit. This is where the head of
the sensor will project into the shower.
From the rear of the shower, locate the black cable
of the temperature sensor. It has a silver tip. Push
the silver tip into the rear of the gromit so that its
head protrudes into the cabin. Now fi x in position
with a small amount of silicone.
Before You Fit The Doors You May Wish To See The "SEALING THE
SHOWER" Section Of These Instructions And Apply Sealant Around
The Base Of The Tray Prior To Fitting The Doors