30
Bluetooth Pairing
Before you can start streaming Audio to your
shower you must fi rst establish a connection
between the shower and the device that will
stream the audio to the shower; this is called
Pairing. You can stream up to 10 meters away,
depending upon interference of walls etc.
Most devices that are Bluetooth Audio Streaming
enabled can be connected to the shower, such
as Smart Phones (Andriod, iPhone etc), Tablets
(Galaxy Tab, iPad etc) and even computers and
Laptops.
1: Press the BLUETOOTH Button on the control pad.
The display will now say BT.
2: On your Smartphone/Tablet etc, go to the
Bluetooth settings (If unsure, refer to your manual
for more information on how to access this)
3: Ensure Bluetooth is active/running on your
device.
4: Initiate a SEARCH/SCAN for New Devices to Pair
to.
Due to the various diff erent number of devices that have
Bluetooth, and the variations on the implementation of
Bluetooth enabled in your device we are unable to guarantee
connectivity or to provide support for connecting, however the
product has been tested on a number of Apple and Android
Tablets and Phones with complete success.
5: After a small amount of time you should see
the device name of the shower appear “ SPROUT”.
Select this to complete the Pairing of the two
devices.
You are now ready to stream audio. Go to your
music playing App, choose a track and press play.
Once Paired you can stream music at any time to
the shower. Only once device can be Paired at any
time.
Cleaning and third party product use
This shower should be cleaned after every use to remove the build up of dirt and bacteria. We would
recommend that after normal showering use, that the cabin doors are left open until the inside is fully
dry. This will help prevent the build up of soap scum, dirt and bacteria.
The shower cabin can trap dirt in gaps between joints of panels etc, which may require extra care and
attention during cleaning. To minimise dirt build up between panels, the application of a bead of silicone
sealant suitable for shower/bathroom use will fi ll the gap leaving a smooth fi nish and both stop dirt build
up and off er an extra level of water tightness.
The shower cabin can be cleaned with any suitable cleaning solution that is not abrasive, and is
recommended by its manufacturer for use on acrylic, chrome and glass surfaces as appropriate to the
materials in the shower. Not all general bathroom cleaners are designed for use on some materials of
this product.
Harse abrashive cleaners containing bleach or peroxide
MUST NOT
be used
DO NOT USE CIF OR OTHER ABRASIVE CLEANING PRODUCTS ON THIS SHOWER.
In hard-water areas, wash down the unit and remove the dirt periodically. Fitting a water fi ltration device
is also advisable in areas where the water is likely to lead to a build up of minerals within the pipes and
divertor assembly. Hard water WILL reduces the life of the Parts that come into contact with water, such
as the Thermostatic Valve. Fitting water softening devices will prevent this.
Summary of Contents for Essence Range
