Vidalux Essence Range, Installation And Operating Manual

Page: 32 / 38

29
Electronic Control Panel
Your steam shower is fitted with an electronic
control panel that allows you to operate the
electronic features of your shower.
From the control panel you can control the lights,
Steam, Radio and Bluetooth audio.
Power ON / OFF
In standby mode this button is lit Red.
Press and keep pressing the power button until
the panel beeps and the light turns Blue. The
Panel is now active.
If the panel is not used for 30 seconds, the panel will
LOCK. This is noted by the lines in the display FLASHING.
To deactivate the LOCK, simply press and hold the POWER
button until a beep is heard and the lines stop fl ashing.
LIGHTS
This model comes with an LED ‘Halo’ ring light
surrounding the monsoon. Press the light
button. With each press, the display will show
ON1, ON2, ON3, OFF. The panel is able to accept
up to three diff erent light relays, hence the
various light modes. Toggle to OFF to turn the
light off .
STEAM
Pressing the Steam button activates the steam
Generator.
Press the M button to toggle between the
Temperature and Duration/Time settings.
Temperature is the setting the cabin will try to
maintain inside the cabin and duration is the
length of time you plan to use the steam. Do
NOT use the steam function for longer than 15
minutes in a session, allowing to fully cool before
re-use.
FAN
The circulation fan can be activated to draw air/
steam inside the cabin out. This may be used in
conjunction with the steam.
OZONE
Close the shower doors and press the Ozone
button. Leave the shower to carryout the process
which takes approximately 10 minutes. then
open the doors and allow the shower to fully air
dry. This device does not ma
ke
any audible or
visual notifi cati
o
n other then the panel display,
but the aroma of Ozone may be noticeable when
you open the doors. The Power button fl ashes
during this process.
M
The button can be used to Store Radio stations
into Memory. The button also serves as a toggle
the function of the ARROW keys for time/
temperature/track/volume/tuning etc.
TUN TEL
Pressing this button will allow you to enter the
tuning mode when the Radio is activated. The
current frequency will be displayed and by using
the Arrow keys can adjust the precise frequency.
ARROWS
The Arrow buttons control Tuning, Volume,
Track Skip etc depending upon which mode is
currently selected. T
T
BLUETOOTH
Pressing this button will allow you to receive
audio played from Bluetooth enabled device.
You can control volume and skip tracks as
described for the USB option. You will have to
PAIR the shower to a bluetooth device fi rst - see
following page. When this mode is activated
then Power button will be lit Red.
RADIO
This button activates the built in FM Radio. In
this mode the power button will be lit White.
Pressing the TUN TEL button and then using
the ARROW buttons allows you to change radio
frequency.
REMOVE PROTECTIVE FILM ON CONTROL
PANEL BEFORE USE