manualshive.com logo in svg

Victron energy Color Control GX, Manual

Share
Download
Victron energy Color Control GX Manual Download Page 50

Check 'Last contact'. If this shows dashes, the GX device has not been able to contact the VRM Portal since power up. If it shows
a time, but still an error is shown, then the GX device has been able to send data, but has since lost contact.

The 'Buffered items' indicates the number of logs that it has stored to send later. If this is larger than 0, it means that the Color
Control GX can not connect to the VRM Portal. All data is sent using the First in First out principle: the VRM Portal will only show
the most up to date information after all old data has been sent.

9.5. Analysing data offline, without VRM

In certain cases, for example for very remote sites where there is no internet available, it can be useful to be able to analyse the
data without first having to upload it to the VRM Portal.

1. Install VictronConnect on a Windows or Apple laptop
2. Insert the storage device containing the log file(s)In Victron
3. Connect, use the GX Log Converter feature to convert them to Excel sheets.

9.6. Remote Console on VRM - Setup

This feature allows full remote control of a GX Device, over the internet:

Remote Console on VRM is disabled by default. Activate it by following these steps:

Color Control GX Manual

Page 46

VRM Portal

Summary of Contents for Color Control GX











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands