Item
Default
Description
Grid setpoint
50W
This sets the point at which power is taken from the grid when
the installation is in self-consumption mode.
Scheduled charging
No
Allows you to set up to five scheduled periods, during which the
system will take power from the grid to charge the battery.
Energy meters
-
Role
Grid meter
Grid meter, PV inverter, Generator
Phase type
Single phase
Modbus unit ID
30
PV inverters
Inverters:
Shows connected AC PV inverters
Inv: Position
AC Input 1
AC input 1, AC input 2, AC Output
Inv: Phase
L1
Inv: Show
Yes
Find PV inverters
Scan for available PV inverters
Detected IP addresses
Shows the IP address of PV inverters that have been discovered
Add IP address manually
If an inverter has a manually assigned IP address, you can add it
directly here.
Automatic scanning
Yes
This setting will continue to look for PV inverters, this can be
useful if using a DHCP assigned IP address that might change.
Wireless AC sensors
Select the position for each AC sensor (PV Inverter on AC-input 1, 2 or on AC-output).
More information about the Wireless
Ethernet
-
read full feature description [13]
State
Connected
MAC address
-
IP configuration
Automatic
IP address
-
Netmask
-
Gateway
-
DNS server
-
Link-local IP address
-
Select the configuration type (DHCP vs. manual configuration) and IP settings.
Wi-Fi
Read full feature description [13]
Create access point
Wi-Fi networks
Name
Connect to network
Forget network
Signal strength
MAC address
IP configuration
IP address
Netmask
Gateway
DNS server
Manage wireless networks and IP settings.
GSM modem
-
Color Control GX Manual
Page 24
Configuration