Victorinox HUNTER MACH 2 Manual Download Page 74

Page: 74 / 86

- 72 -

6.7.2 Setting the calendar-alarm function

Pull the crown to position 2. Briefly press button

select and flash the figures of the hours, minutes, date,
month and year successively. New data is set by turn-
ing the crown and confirming by briefly pressing button

. The new date for the annual alarm (

) is confirmed

by pushing the crown back to position 1 and confirmed
by the appearance of the “

” message. In the exam-

ple opposite, the calendar-alarm will be programmed
to 29/01/99 at 12:00. Push the crown back to position 1:
the alarm is automatically switched on (

)*.

*The calendar-alarm will only be switched on if

the date you have programmed is a date in the
future. There will be no ON display if the date
you have entered is in the past.

The alarm sound is stopped by pressing one of the
buttons or the crown.

Pressing and holding button

activates (

)

or deactivates (

) the calendar-alarm.

29:01:99

12:00:on

29:01:99

Summary of Contents for HUNTER MACH 2























































































Search results

Summary of Contents for HUNTER MACH 2

Reviews:

Related manuals for HUNTER MACH 2

Brands by name

Popular brands

Victorinox HUNTER MACH 2, Manual

Search results

Summary of Contents for HUNTER MACH 2

Reviews:

Related manuals for HUNTER MACH 2

Brands by name

Popular brands