Victorinox HUNTER MACH 2 Manual Download Page 71

Page: 71 / 86

6.6 SETTING THE ALARM (DAILY ALARM)

6.6.1 Starting the alarm

Select the alarm function (

) by turning the crown and pressing and

holding button

. The letters “

” will appear on the dial and a “beep”

will be heard.

6.6.2 Alarm sound

At the chosen alarm time, a first alarm will sound.
After 10 seconds, the alarm will sound intermit-
tently for 50 seconds and then stop automatically.

6.6.3 Stopping the alarm

The alarm may be stopped at any moment
by pressing either of the buttons or the crown.

6.6.4 Testing the alarm sound (applicable to all alarms)

When the alarm (

) function is selected, the alarm sound may be tested

by pressing and holding button

. The same test may be used for

“

Timer

” and “

Diary

” alarms.

- 69 -

07:10:on

Alarm

ON/OFF

Striking
mechanism
test:

Press and
hold button

Summary of Contents for HUNTER MACH 2























































































Search results

Summary of Contents for HUNTER MACH 2

Reviews:

Related manuals for HUNTER MACH 2

Brands by name

Popular brands

Victorinox HUNTER MACH 2, Manual

Search results

Summary of Contents for HUNTER MACH 2

Reviews:

Related manuals for HUNTER MACH 2

Brands by name

Popular brands