Victorinox HUNTER MACH 2 Manual Download Page 6

Page: 6 / 86

- 4 -

SETTING THE DATE & TIME - Screw Down Crown (SeaPlane, FA-18,
and Hunter watches)

A. Using the thumb and forefinger, apply mild pressure on crown while

rotating toward you until crown releases.

B. Pull out crown to position (2). Turn the crown away from you

until the date showing is the day before the desired setting.

C. Pull out the crown to the fully extended position (3) and rotate toward

you. When midnight is reached, the date will advance
to the desired date. Continue to turn the crown until the desired time
is set. Remember, the date advances at 12:00 midnight,
not 12:00 noon.

D. After setting, push in the crown then press and screw down away

from you until it is sealed tight into position (1). The date and time
are now set.

To Set Time Alone

Release crown (refer to “A’) and then follow instruction “D”.

Summary of Contents for HUNTER MACH 2























































































Search results

Summary of Contents for HUNTER MACH 2

Reviews:

Related manuals for HUNTER MACH 2

Brands by name

Popular brands

Victorinox HUNTER MACH 2, Manual

Search results

Summary of Contents for HUNTER MACH 2

Reviews:

Related manuals for HUNTER MACH 2

Brands by name

Popular brands