Omron H3DE User Manual Download

Page: 1 / 34

Solid-state Timer

H3DE

B-51

Solid-state Timer

H3DE

DIN Track Mounted, Standard 22.5-mm Width Timer Range

• A wide AC/DC power supply range (24 to 230 VAC/DC) reduces the number of timer models kept in stock. (except for H3DE-H)

• 12-VDC model available for a specific application. (H3DE-M2)

• Nameplate provided for easy timer identification and management.

• Terminal clamp left open when delivered.

• Finger protection terminal block to meet VDE0106/P100.

• Enables easy sequence checks through instantaneous outputs for a zero set value at any time range.

• Incorporates environment-friendly, cadmium-free contacts. (except for H3DE-H)

• High immunity to inverter noise.

• Approved by UL and CSA.

• Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives.

■

Broad Line-up of H3DE Series

Contents

Solid-state Timer

H3DE-M/-S......................................................................................................................................

B-53

H3DE-F ...........................................................................................................................................

B-63

H3DE-G ..........................................................................................................................................

B-69

H3DE-H...........................................................................................................................................

B-75

Common to ALL Timers

Accessories.....................................................................................................................................

B-81

Precautions .....................................................................................................................................

B-82

H3DE

Standard Timer

Twin Timer

H3DE-F

Star-delta Timer

H3DE-G

Power OFF-delay Timer

H3DE-H

H3DE-M/S

H3DE-F

H3DE-G

H3DE-H

H3DE-M
H3DE-S

Summary of Contents for H3DE



































Search results

Summary of Contents for H3DE

Reviews:

Related manuals for H3DE

Brands by name

Popular brands

Omron H3DE, Manual

Search results

Summary of Contents for H3DE

Reviews:

Related manuals for H3DE

Brands by name

Popular brands