Victaulic VicFlex AB12, Field Installation Handbook

Page: 153 / 204

I-VICFLEX_153
VICFLEX TAMPER EVIDENT LABELS
REV_A
APPLYING THE TAMPER-EVIDENT LABEL TO THE
STYLE AB7 END BRACKET
1. Align the edge of the larger tamper-
evident label (part code Z000AQFTMP)
with the edge of the Style AB7 end
bracket. The label shall be affixed with
the warning block facing outward (away
from the center gate).
2. Wrap the label tightly around to the
other side of the Style AB7 end bracket.
3.
Finish wrapping the label around the
Style AB7 end bracket so that the warn-
ing blocks overlap, as shown. Repeat
these steps for the other Style AB7 end
bracket.
4. Align the edge of the smaller tamper
evident label (part code Z000AQFLBL)
with the edge of the Style AB1, AB2,
or AB10 end bracket, as shown in
the photo to the left, and cover the
sheet metal screw. Ensure the label is
adhered completely to the flat section
of the end bracket.