VG412
34
DISASSEMBLY, CLEANING & STORING
The tool should be disassembled and cleaned before moving it to another work site or putting it in
storage. The following procedures apply to disassembly and cleaning.
1. Unplug motor from the power source.
2. Slide indexing bar back.
3. Remove
spacers.
4. Remove motor. Two people are needed for this operation, as described below.
•
Make sure no one is near the gears, then slide the motor away from pinion block by loosning the
wing handle clamp screws beneath motor. CAUTION. When motor is disengaged, the gears may
rotate. No one should be near the gears when the motor is being disengaged
•
Retighten wing handle clamp screws below motor.
•
The motor mount is fastened to the gear plate by four wing handle clamp screws. While one
person unfastens these screws, a second person should prepare to support the weight of the arm
and motor. It takes two hands to hold the motor and motor mount. The person loosening the
screws only has one free hand. Therefore, a second person is needed.
Summary of Contents for VG412
Page 1: ...46046 O...
