VG412
33
NOTES
:
*Be sure that both blades are sharp to insure good, clean cutting action. These blades are of high quality
tool steel and are easily resharpened. DO NOT CUT STEEL WITH CARBIDE TIPPED BLADES.
* Be sure that both star wheels are being turned by the acturator bar the same amount each time.
* When cutting ordinarly carbon steel pipe, the “chip” generated by the cutoff blades may occasionally
accumulate in the cut and cause the blades to jam, stopping the machine. If this happens: (1) take foot
off power switch; (2) unplug power cord from power source; (3) retract cutter blade one-half turn; (4)
rotate gear plate one-quarter turn counter clock-wise; (5) cleanout chips from cut grove; and (6) restart
machine and continue cutting. Be sure to retract cutting blade 1/2 turn before resuming cutting
operation.
Summary of Contents for VG412
Page 1: ...46046 O...
