VG412
36
MAINTENANCE
GENERAL
This section of the manual provides information about keeping tools in top operating condition.
Replacement parts, applicable to these tools, should be ordered from Victaulic to assure proper operation
of the tool. All parts are FOB Easton, Pennsylvania, at the price in effect at the time of the order.
8-HOUR CARE
After every 8 hours of operation, lubricate the machine.
1. The eight radial bearings (275727) require periodic attention as follows:
•
Check tightness of nut (275789) on shoulder screw (275726). Retighten if necessary.
•
Bearings should rotate freely. If bearings do not rotate freely,replace them. If bearings become
excessively loose, replace them.
•
The two radial bearings (275729) used in the pinion block (220621) are pre-lubricated, sealed,
and shielded. These bearings are expected to be maintenance free, provided that they are not
demaged in use.
Summary of Contents for VG412
Page 1: ...46046 O...
