VG412
2
HAZARD IDENTIFICATION
READ THIS FIRST
Definitions for identifying the various hazard levels shown on warning labels or to indicate proper safety
procedures in this Manual are provided below.
This safety alert symbol indicates important safety messages on warning labels and in this manual. When
you see this symbol be alert to the possibility of personal injury and carefully read and fully understand
the message that follows.
OPERATOR SAFETY STRUCTIONS
This tool is designed only for cut grooving pipe. To accomplish this function requires some dexterity and
mechanical skills, as well as sound safety habits. Although this tool is manufactured for safe dependable
operation, it is impossible to anticipate those combinations of circumstances which could result in an
accident. The following instructions are recommended for safe operation of the tool. The operator is
cautioned to always practice "Safety First" during each phase of use, including setup and maintenance of
this unit. It is the responsibility of the owner, lessee or user of this tool to ensure that all operators
receive, read and understand this manual and are fully trained to operate this tool.
GENERAL
1. Read and understand this Manual before operating or performing maintenance on this tool.
Become familiar with the tool’s operations, applications and limitations. Be particularly aware of its
specific hazards. Store this manual in a clean area and always at a readily available location.
Additional copies at no charge are available upon request by writing or phoning the Victaulic Tool
Company.
2. Use only recommended accessories. Use of improper accessories may be hazardous. See
Accessories on page 40.
3. This tool is designed ONLY for cut grooving of pipe sizes, materials and wall thicknesses
outlined under Tool Rating on page 8 and Tool Bit Selection on page 38.
Summary of Contents for VG412
Page 1: ...46046 O...
