manualshive.com logo in svg

Vicon CE102D, Installation Manual

Share
Download
Vicon CE102D Installation Manual Download Page 58

 

58

•   Backup 
 Click 

the 

Backup button to save setting values that users enter to the network camera to a user   

 PC. 
 
•   Restore 
 Click 

the 

Restore button to import and apply setting values saved to a user PC. 

 

 

 

 
Note: Backup and Restore can only be used on the same unit running the same firmware. This 
feature is not intended for multi-configurations or for firmware upgrades. 

 
7) Support 
 
The support page provides valuable information on troubleshooting and contact information, should 
you require technical assistance. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
•   Logs 

The network camera support system log information. Click the System Log button to get the log 
data. 

 
•   Reports 
  

- 

Server Report: Click the Server Report button to get the important information about the 

 

 

server’s status and should always be included when requesting support. 

  

- 

Parameter List: Click the Parameter List button to see the unit’s parameters and their   

 

 

current settings. 

 
 
 
 
 

Summary of Contents for CE102D








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands