Vicon CE102D, Installation Manual

Page: 37 / 71

37
• Record Schedule
The weekly recording schedule can be set for each day. Drag or click a box area; clicking the block
toggles the recording between on and off. Click the “All Select” button to set a schedule for the entire
week, 24/7; to record for a whole day, click in the “0” box and drag to “23.”
Note that the time is in 24 hour format, where 0 indicates midnight.
• Device Setting
Select Device Type to be recorded in the drop-down list. The screen changes according to
selection.
- SD: Built-in SD card
- CIFS: A file format for a NAS device.
- NFS: A file format for a NAS device.
Note 1: Common Internet File System (CIFS) is a remote file access protocol that forms the basis for
Windows file sharing, network printing, and various other network services. CIFS requires a large
number of request/response transactions and its performance degrades significantly over high-latency
WAN links such as the Internet.
Note 2: Network File System (NFS) is a network file system protocol, allowing a user on a client
computer to access files over a network in a manner similar to how local storage is accessed. NFS, like
many other protocols, builds on the Open Network Computing Remote Procedure Call (ONC RPC)
system.
The CIFS screen displays as below.
* Address: Enter IP address for NAS device.
* Remote Directory: Enter directory or folder location to be recorded in the NAS device.
* Capacity: Enter the capacity of storage to be used. It must be less than the total storage
capacity.
* IP/Password: Enter ID and Password. The network camera will ask for these whenever
you access NAS device.
* Check: Press the Check button to check the validity of Device Setting data.
• Format
Click the Format button to format SD card.
• Device Information
Show current SD card information.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.