24
AE & AWB
• Exposure control
This page provides access to the advanced exposure control settings for the network camera.
- Mode:
Supports exposure modes to control the amount of light detected by the camera
sensor based on settings for light conditions. The default setting is Auto mode.
* Automatic: Automatically sets the amount of light detected by the image sensor.
*
Hold Current: Fixes the exposure at its current state.
-
Value:
Select a value in the drop-down list to tune the exposure. The default setting is 5.
-
AGC: Select a value in the drop-down list to specify the level according to the screen
luminance. The default setting is 30dB.
- Enable Backlight Compensation: Set this checkbox to activate the BLC operation.
-
Enable Flicker free: Set this checkbox to activate the flicker free operation.
-
Flicker
Mode - Provides the options for flicker.
*
50Hz: Select at 50 Hz environments.
*
60Hz: Select at 60 Hz environments.
- Enable Long Exposure: Set this checkbox to activate the electronic shutter of the camera.
*
Max. Shutter: Select a shutter speed value in the drop-down list. The default setting is 1/15.
Summary of Contents for CE102D
Page 9: ...9 Locking Screw Camera Dimension Refer to the diagrams below for exact dimensions...
Page 22: ...22 3 5 3 Video Image Basic Refer to 3 5 1 Basic Configuration Video Image for more details...
Page 71: ...CE102D Network Indoor Camera Dome Vicon Industries Inc Internet Address www vicon security com...
