manualshive.com logo in svg

Vicon CE102D, Installation Manual

Share
Download
Vicon CE102D Installation Manual Download Page 26

 

26

•    Day & Night Control 

 

-

 

Mode: Select the day/night mode from among three modes. 

 * 

Automatic: Normally works in day mode; switches automatically to night mode in a dark 

place. 

 * 

Day: Always works in day mode. 

 * 

Night: Always works in night mode. 

-

 

Threshold: Controls the how fast the change is from day to night or night to day.   

-

 

*High: Quickly changes to day mode, but slowly changes to night mode. 

-

 

*Low: Quickly changes to night mode, but slowly changes to day mode. 

 
•   IR Control 
 

-

 

Enable IR: Check this box to activate IR operation. 

 * Max 

Strength: 

Select a value in the drop-down list to tune the strength. The default setting 

is 5. 

 

When the settings are complete, click Save, or click Reset to revert to previously saved settings

.

 

 

 Privacy Masking 

 
The privacy masking function allows selected parts of the video image being transmitted to be masked 
from view. Up to eight privacy masks (or motion detection windows) can be set; the color of privacy 
masks is black. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Select “Enable privacy masking” to activate the privacy masking function. 
 

Summary of Contents for CE102D








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands