Vicon CE102D, Installation Manual

Page: 34 / 71

34
SMTP authentication, you must define the weakest authentication method allowed.
- Login Method: Set the weakest method allowed to the highest/safest method supported
by the mail server. The most secure method is listed in the drop-down list:
Login/Plain
• SMTP (E-Mail) Receiver
- Receiver: Enter an email address for a receiver. You can register up to 8 e-mail addresses
of recipients.
• SMTP (E-Mail) Test
- Receiver: Enter an email address and click the Test button to test that the mail servers are
functioning and that the email address is valid.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.

FTP & JPEG
When the network camera detects an event, it can record and save images to an FTP server. Images
can be sent as e-mail attachments. Check the box to enable the service.
• FTP
Setting
- Server: Enter the server's IP address or host name. Note that a DNS server must be
specified in the TCP/IP network settings if using a host name.
- Port: Enter the port number used by the FTP server. The default is 21.
Passive mode: Under normal circumstances the network camera simply requests the target
FTP server to open the data connection. Checking this box issues a PASV command to the
FTP server and establishes a passive FTP connection, whereby the network camera actively
initiates both the FTP control and data connections to the target server. This is normally
desirable if there is a firewall between the camera and the target FTP server.