Viavi Seeker D Lite, User Manual

Page: 37 / 42

Seeker D Lite User’s Guide
Document Num., Rev. 4 May 2018 Page 37
Appendix
Chapter 6
Specifications
Operation Specifications
Frequency Range
Low Band: 135–139 MHz
High Band: 610.5–615 MHz
Adjustable in 12.5 kHz Steps via Seeker Setup Software
Frequency Settings
10 user-adjustable operating frequencies, selectable on front panel
Set using the configuration methods listed below
Receiver Sensitivity -115 dBmV
Calibrated Level
Range
20 to 2000 μV/m scaled to match an analog carrier or QAM carrier when used with CT-4 channel tagger in
the headend
0.1 to 20 μV/m scaled to match an analog carrier or QAM carrier when used with Seeker D Lite Source
Transmitter in the home
Level Accuracy ±2.0 dB
Automatic Noise
and Overbuild
Discrimination
Internal circuitry discriminates between leaks and noise
Overbuild discrimination provided by the CT-4 channel tagger installed in hub or headend or the Seeker D
Lite Source Transmitter in the home
Physical Specifications
Construction Plastic housing, with form fit case produced with ballistic nylon for protection
Control Front panel rubber keypad
Display Dual numerical readout of detected low and high band leakage within sensitivity range
Speaker
Tone is present if leakage amplitude exceeds squelch setting and digital tag is detected
Pitch is proportional to strength of leak
Dimensions
(H x W x D)
7.50 x 3.25 x 1.50 in (191 x 83 x 38 mm)
Weight
1.0 lbs (454 grams)
Available Interface Types
Antenna Internal dual band
USB Mini-B Port for charging & configuration using Seeker Setup Software
Battery & Power Specifications
Operating Time 8 hours plus, dependent on use
Charge Time 10 hours
Battery Single 2600 mAh @ 3.7V Li-Ion internal battery, factory replaceable
Power Adapter
Input: 100 to 240 VAC ~ 50 to 60 Hz, 0.3A Max
Output: 5 VDC, 1.0A
Environmental Specifications
Storage & Operating
Temperature Storage: -10˚ to +70˚ C (-40˚ to 158˚ F)
Operating: -20˚ to +50˚ C (-4˚ to 122˚ F)