Seeker D Lite User's Guide
Document Num., Rev. 4
May 2018
Page 32
Ambient Noise Level Measurement
This measurement is used to find ambient noise sources that may be emitting RF signals
at the currently selected leakage frequency. This provides a useful tool for troubleshooting
noise issues that may occur in and around the house.
To perform a measurement of ambient noise that does not carry the tagged signal of the
CT-4, turn your Seeker D Lite on and press the
SELECT
button repeatedly until the arrow
appears under the Tag icon, as shown in the image below.
• When the Tag icon is selected, pressing the
CHANGE
button will enable/disable the Ambient Noise Level
Measurement function.
• When this display is selected, the following will occur:
• If the Ambient Noise Level Measurement function
is currently disabled, only the arrow below the Tag
icon will flash, as indicated by the red circle in the
image to the right.
Ambient Level
Measurement Disabled
After a few seconds in the Ambient Noise Level Measurement
display without any action by the user, the display will revert
to the Signal Level display.
• If the Ambient Noise Level Measurement function
is currently enabled, the Tag icon will flash a few
times prior to turning off (with the arrow below the
icon), as indicated by the red circle in the image
to the right. The NOISE icon will also display,
indicating Noise mode is turned on.
Ambient Level
Measurement Enabled
Summary of Contents for Seeker D Lite
Page 1: ...Seeker D Lite In Home Leakage Detector User s Guide ...
Page 8: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 8 ...
Page 12: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 12 ...
Page 41: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 41 ...
