Seeker D Lite User's Guide
Document Num., Rev. 4
May 2018
Page 24
No Signal Detected
1
2
3
Untagged Signal Detected
1
2
3
Tagged Signal Detected
(High Frequency)
2
1
3
No Signal Detected
If there isn’t a signal detected for the primary or secondary frequency, the following will
occur:
1. The bar graph will remain blank.
2. The numerical display will remain blank.
3. The Tag icon will not appear in the upper right corner of
the screen.
Untagged Signal Detected
If there is a signal detected for the primary frequency and it does not contain the CT-4
channel tag (ambient noise), the following will occur:
1. The bar graph will indicate the relative signal level.
2. The numerical display will remain blank.
3. The Tag icon will not appear in the upper right corner of
the screen.
Tagged Signal Detected on High/Low Frequency
If there is a signal detected for the high/low frequency and it contains the CT-4 channel
tag, the following will occur:
1. The bar graph will indicate the relative signal level.
2. The RF signal level will be displayed numerically.
3. The Tag icon will appear in the upper right corner of the
screen.
4. The audible tone will sound proportional to signal
strength.
Summary of Contents for Seeker D Lite
Page 1: ...Seeker D Lite In Home Leakage Detector User s Guide ...
Page 8: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 8 ...
Page 12: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 12 ...
Page 41: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 41 ...
