Seeker D Lite User's Guide
Document Num., Rev. 4
May 2018
Page 22
Basic Operation
Power On/Off
Press and hold the red
ON/OFF
button until you hear three ascending tones. Within a few
moments your Seeker D Lite will startup into the RF Signal Measurement Mode.
Low Battery Warning
A very low battery may cause the Seeker D Lite not to turn on.
When the battery is too low for your Seeker D Lite to function,
the screen shown to the right will appear. The battery must be
charged for a few minutes before using again.
Low Battery Warning
PC Communications Mode
This mode is used by the Seeker Setup software to send and
retrieve configuration parameters from your Seeker D Lite. To
enter this mode, connect the Seeker D Lite to a PC or laptop
computer using a mini-USB charge / data cable and then open
the Seeker Setup software to communicate with the Seeker D
Lite. The screen shown to the right will be displayed while your
Seeker D Lite is in this mode.
PC Communication Mode
Summary of Contents for Seeker D Lite
Page 1: ...Seeker D Lite In Home Leakage Detector User s Guide ...
Page 8: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 8 ...
Page 12: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 12 ...
Page 41: ...Seeker D Lite User s Guide Document Num Rev 4 May 2018 Page 41 ...