Vetland EX3000, Operator'S Manual

Page: 11 / 88

Introduction 1-3
Facility Requirements
Table 1-1 provides the facility requirements necessary to ensure reliable operation and safety of the
EX3000 Anesthesia System.
Table 1-1 Facility Requirements
Characteristic Specification
Working Area Large enough to accommodate the anesthesia system. See Figure 1-2.
Power 95 - 240 VAC, 50/60 Hz
Note: An AC power fail alarm sounds with both audible and visual indicators if
power supply drops below 95 VAC. The alarm is self-resetting.
Oxygen Supply Delivery Options:
x
Oxygen supply hose from the facility oxygen outlet
x
Type E cylinder mounted to the anesthesia machine via an optional
manifold and yoke assembly
x
Type H cylinder strapped to facility wall or a cylinder cart
Regulated Inlet Pressure: 50–60 psi (345–380 kPa)
Note: A low O
2
pressure alarm sounds with both audible and visual indicators
if supply pressure drops below approximately 45 psig. Alarm is self-resetting.
Flow Rate: 20 liters per minute at 55 psi (379 kPa)
Oxygen: Medical Grade
Pneumatic Fitting Diameter Indexed Safety System (DISS) for Oxygen
Environment
Storage Temperature: 41 to 122
q
F (5 to 50
q
C)
Operating Temperature: 59 to 95
q
F (15 to 35
q
C)
Relative Humidity: 5 to 90% (non-condensing)
Altitude: 1609 meters (5278 feet) maximum
Note: If you have any questions about facility requirements, please contact Vetland or your
authorized distributor.