Vetek DGT, Technical Manual

Page: 55 / 87

DGT / DGT60 / DGTQ / DGTP
55
tErM SETTING TERMINATOR
When connecting a printer it is often necessary to transmit one of the following protocols in order to
define the end of the print line.
Cr CR (for DP190, LP522/542P, TPR)
CrLF CR LF (for EPSON LX300 and TMU295).
(!) Cr
PForM PRINT FORMATTING
In this step one enters a submenu for selecting the weight data which one wants to print and the print
layout.
Depending on the type of printer selected in the PrModE step (LP542P or tPr), the parameters which
are suggested, change.
nr.CoP NUMBER OF TICKET COPIES
Through this step one sets the number of ticket copies which will be printed, valid for any type of printout
and functioning mode.
The possible values are 1…3.
(!) 1.
8.1 FORMATTING DATA AND LAYOUT
Depending on the type of selected printer in the PrModE step (LP542P o tPr), the suggested parameters are
different.
LP542P
PForM
tPr