H
YDRAULIC
D
IAGRAM
–
L
IFT
-H
OLD
-L
OWER CIRCUITS
¾
Care should be taken to identify all potential hazards and comply with applicable safety procedures before
beginning work.
¾
¾
Only qualified individuals trained to understand mechanical devices and their associated electrical and
hydraulic circuits should attempt troubleshooting and repair of this equipment
CAUTION:
Do not use brake fluid or jack oils in the hydraulic system. If oil is needed, use an anti-wear hydraulic
oil with a viscosity of 150 SUS at 100°F (ISO 32 @ 40°C), or non-synthetic transmission fluid.
Fully lower the carriage to the floor before beginning any inspection or work on the unit.
