VESTEL 40UA9300, Operating Instructions Manual

Page: 167 / 176

English - 109 -
No display.
Means that your TV doesn't
receive any broadcast.
Make sure that you have broad-
cast on your TV.
Antenna might have been
connected incorrectly.
Make sure antenna is connected correctly.
Antenna cable might
be damaged.
Make sure antenna cable isn't damaged.
Incorrect connectors
might be used for con-
necting the antenna.
Have an authorized person check an-
tenna connection is made correctly.
Incorrect buttons might
have been pressed on
the remote control.
Retry and make sure you press
the correct buttons.
Correct input source might
not have been selected.
Make sure you have select-
ed the correct input.
PROBLEM CAUSE REMEDY
Displaying,
no sound.
TV might be muted.
To cancel the mute option, press the
button or turn up the volume.
Display is bad in
computer mode.
Screen resolution and set-
tings of computer and TV
might be incompatible.
Change resolution informa-
tion on your computer.
Sound is received
from one
speaker only.
Balance set might
be adjusted to one
direction extreme.
Check from audio menu section.
Remote control
does not work.
Battery may have
been discharged.
Replace the batteries.
Batteries might have
been inserted incorrectly.
Check the directions of batteries and
make sure you install them correctly.
There might be a barrier
between remote and TV.
Remove the barrier.
Input options
can't be selected.
No device might
be connected.
Make sure a device is connected to your TV.
AV cables and connec-
tions might be incorrect
if you have tried to
connect a device.
Make sure AV cables and con-
nections are correct.