VESTEL 40UA9300, Operating Instructions Manual

Page: 132 / 176

English - 74 -
Analogue: If Analogue broadcast search
option is turned on, the TV will search for
analogue broadcasts after other initial settings
are completed.
Additionally you can set a broadcast type as
your favourite one. Priority will be given to
the selected broadcast type during the search
process and the channels of it will be listed on
the top of the Channel List . When finished,
press OK to continue.
You can activate Store Mode option at this
point. This option will configure your TV’s
settings for store environment and depending
on the TV model being used, the supported
features of it may be displayed on the top of
the screen as an info banner. This option is
intended only for store use. It is recommen-
ded to select Home Mode for home use. This
option will be available in System>Options>-
More menu and can be turned off/on later.
Press OK button on the remote control to
continue and the Network Settings menu
will be displayed. Please refer to Connecti-
vity section to configure a wired or a wireless
connection. After the settings are completed
press OK button to continue. To skip to the
next step without doing anything press the
Rapid advance button on the remote.
After the initial settings are completed TV will
start to search for available broadcasts of the
selected broadcast types.
After all the available stations are stored,
scan results will be displayed. Press OK to
continue. The Edit Channel List menu will
be displayed next. You can edit the channel
list according to your preferences or press the
Menu button to quit and watch TV.
While the search continues a message may
appear, asking whether you want to sort
channels according to the LCN (*) . Select
Yes and press OK to confirm .
(*) LCN is the Logical Channel Number
system that organizes available broadcasts
in accordance with a recognizable channel
number sequence (if available).
Note: Do not turn off the TV while initializing
first time installation. Note that, some options
may not be available depending on the
country selection.
Using SatcoDX Feature
You can perform SatcoDX operations using
the Installation>Satelite Settings menu. In
the SatcoDX menu, there are two options
regarding to the SatcoDx.
You can download or upload SatcoDX data.
In order to perform these functions a USB
device must be connected to the TV.
You can upload current services and related
satellites & transponders in TV, to a USB
device.
Additionally you can download one of the
SatcoDx files stored in USB device, to the TV.
When you select one of these files, all services
and related satellites and transponders in
the selected file will be stored in the TV. If
there are any installed terrestrial, cable and/
or analog services, they will be kept and only
satellite services will be removed.
Afterwards, check your antenna settings and
make changes if necessary. An error message
stating “ No Signal ” may be displayed if the
antenna settings are not configured properly.