Automatic mode Introduction
Push the selector switch to
(A),
all the way to the left until you
hear the “click” in order to activate the
automatic mode.
The automatic mode is now activated and the roller shutter will
move up and down at the programmed times. Regardless of the
programmed times, it is still possible to move the roller shutter
up and down by pressing the
up
or
down
button and the pro-
gramming remains unaffected.
If you press the
up
or
down
button longer than 2 seconds, the
roller shutter moves up or down.
Simply press the opposite button to stop the motion, i.e.:
·
press the
down
button, if the roller shutter is moving up,
·
press the
up
button, if the roller shutter is moving down.
The roller shutter will only move up or down again after the
up
or
down
button has been pressed.
By simply pushing the selector switch to manual mode
(H),
the
automatic mode can be interrupted for an extended period of
time.
After selecting the automatic mode again, the
Vestamatic
Rollmat
Plus G/S V3.1
roller shutter control will execute the last pending
command from the automatic mode. The last pending command
will also be executed when resetting after power failure.
- 45 -
G
Basic functions General
After the installation has been completed correctly (for instruc-
tions please see pages 67 to 74), you can start programming.
Important:
Please note that the
Vestamatic
Rollmat Plus G/S
V3.1
roller shutter control cannot be programmed in
case of power failure.
Carefully pull to remove the cover cap and press the
reset
button
with the delivered adjustment tool or something else suitable.
Pressing the
reset
button will activate the default times prepro-
grammed by the manufacturer.
·
Current time –
0ß8:0ß0
·
Up time –
0ß6:0ß0
·
Down time –
2ß0:0ß0
On the following pages, you will find instructions how to cus-
tomize these times to your personal requirements.
- 46 -
G
