Safety precautions
·
Check the control for any signs of damage immediately after
unpacking. Do not start up the control in case there is any
damage. If there is damage due to the shipping, please notify
the supplier immediately.
·
Please note that the roller shutter control requires an operating
voltage of 230 V
W
, 50 Hz. Make sure to contact a professional
electrician for the installation and setting of the DIP switches
on the rear panel of the device.
·
The control was designed for correct use as described in the
operating instructions. Any changes or modifications thereof
are not permissible and will result in loss of all warranty claims.
·
If safe operation of control or roller shutter can not be guar-
anteed, the control must be turned off immediately and pro-
tected against unintentional operation. The same applies for
work on windows or roller shutters that are operated by this
control.
- 40 -
G
Installation and Operating Instructions
Rollmat Plus G/S V3.1
