VESPA GTS 300 i.e. Manual Download Page 71

Page: 71 / 98

Power

: -

Quantity

: 2

03_31

Rear optical unit (03_31)

Remove screw «

» to remove the rear headlight assembly.

Access to taillight bulbs, stop light bulb and license plate bulb.

To reassemble, repeat the operation but in reverse order.

N.B.

IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE A FAULT AND IS ATTRIBUTABLE TO HUMIDITY AND/OR
TO LOW TEMPERATURES.

THE PHENOMENON SHOULD QUICKLY DISAPPEAR WHEN THE LIGHT IS
SWITCHED ON.

THE PRESENCE OF DROPS OF WATER, ON THE OTHER HAND, COULD INDI-
CATE THAT WATER IS INFILTRATING. CONTACT THE AFTER-SALES SERVICE
NETWORK.

N.B.

CHECK THE PRESENCE OF THE REAR REFLECTOR IN THE VERSIONS WHERE
AVAILABLE.

REAR LIGHT UNIT BULBS

Rear tail light bulb

Type

: Capless

3 Maintenance

Summary of Contents for GTS 300 i.e.



































































































Search results

Summary of Contents for GTS 300 i.e.

Reviews:

Related manuals for GTS 300 i.e.

Brands by name

Popular brands

VESPA GTS 300 i.e., Manual

Search results

Summary of Contents for GTS 300 i.e.

Reviews:

Related manuals for GTS 300 i.e.

Brands by name

Popular brands