VESPA GTS 300 i.e. Manual Download Page 23

Page: 23 / 98

• To restart the ASR it is necessary to turn on vehicle panel (key on).

It is however necessary to repeat the process until it succeeds.

CAUTION

IF NECESSARY, CONTACT AN AUTHORISED SERVICE CENTRE.

The immobilizer system

In order to enhance theft protection, the vehicle is equipped with a «

PIAGGIO IMMO-

BILIZER

» electronic engine locking device that is activated automatically when the

ignition key is removed. Upon start-up, the «

PIAGGIO IMMOBILIZER

» system checks

the starter key, and only if this key is recognised will the Immobiliser system allow the
vehicle to be started.

01_15

Keys (01_15)

The vehicle is supplied with two types of keys. The «

» key with a brown grip and the

MASTER

" key. Only a single copy of this key is supplied, which is necessary to pro-

gram all the other keys and for the dealer to perform some maintenance operations.
We therefore recommend that it be used only under exceptional circumstances. The
blue key «

» (single copy supplied) is used for normal operations and for start-up.

WARNING

THE LOSS OF THE BROWN KEY PREVENTS LATER REPAIRS TO THE "PIAG-
GIO IMMOBILIZER" SYSTEM AND TO THE ENGINE CONTROL UNIT.

1 Vehicle

Summary of Contents for GTS 300 i.e.



































































































Search results

Summary of Contents for GTS 300 i.e.

Reviews:

Related manuals for GTS 300 i.e.

Brands by name

Popular brands

VESPA GTS 300 i.e., Manual

Search results

Summary of Contents for GTS 300 i.e.

Reviews:

Related manuals for GTS 300 i.e.

Brands by name

Popular brands