VESPA GTS 300 i.e. Manual Download Page 34

Page: 34 / 98

02_01

Checks (02_01)

Before using the vehicle, check:

. That the fuel tank is full.

. The correct fluid level for front and rear brakes.

. That the tyres are properly inflated.

. The correct functioning of side lights, headlamp, turn indicators, stop light and li-

cense plate light.

. The correct functioning of front and rear brakes.

. The oil level in the in the gearcase.

. The engine oil level.

. The coolant level.

02_02

Refuelling (02_02, 02_03)

Fuel: lift the saddle and unscrew the cap «

». Prescribed fuel: Minimum 95 octane

unleaded petrol. The reserve fuel level is indicated by the warning light «

».

WARNING

SWITCH OFF THE ENGINE BEFORE REFUELLING WITH PETROL.

PETROL IS HIGHLY INFLAMMABLE.

DO NOT SMOKE AND KEEP NAKED FLAMES AT A DISTANCE:FIRE HAZARD.

DO NOT INHALE FUEL FUMES.

DO NOT ALLOW PETROL TO COME INTO CONTACT WITH HOT ENGINE OR
ANY PLASTIC PARTS.

2 Use

Summary of Contents for GTS 300 i.e.



































































































Search results

Summary of Contents for GTS 300 i.e.

Reviews:

Related manuals for GTS 300 i.e.

Brands by name

Popular brands

VESPA GTS 300 i.e., Manual

Search results

Summary of Contents for GTS 300 i.e.

Reviews:

Related manuals for GTS 300 i.e.

Brands by name

Popular brands